Pay in installments of $5.51 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 5 - Jul 10
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
monstera thai plant Variegated Monstera Thai ConstellationThe Monstera 'Thai Constellation', scientifically known as Monstera deliciosa 'Thai Constellation', is a rare and highly sought after houseplant with dramatic variegated leaves. Its large, fenestrated foliage features splashes of creamy white and green, resembling a galaxy of starshence its celestial name. Native to the tropical rainforests of Central America, this Monstera variety is a slow growing beauty that thrives indoors under the right
The Monstera 'Thai Constellation', scientifically known as Monstera deliciosa 'Thai Constellation', is a rare and highly sought-after houseplant with dramatic variegated leaves. Its large, fenestrated foliage features splashes of creamy white and green, resembling a galaxy of stars—hence its celestial name.
Native to the tropical rainforests of Central America, this Monstera variety is a slow-growing beauty that thrives indoors under the right conditions. Its breathtaking variegation and iconic leaf structure make it a must-have for plant collectors and enthusiasts.
- Common Names: Monstera Thai Constellation, Variegated Monstera
- Botanical Name: Monstera deliciosa 'Thai Constellation'
- Size: Grows up to 2-5 feet tall indoors with proper care.
Care Instructions
- Light: Prefers bright, indirect light to maintain its variegation. Low light may cause reduced variegation, while direct sunlight can scorch the leaves.
- Water: Allow the top inch of soil to dry out between waterings. Water thoroughly, ensuring proper drainage to prevent root rot.
- Humidity: Thrives in high humidity. Mist regularly or place near a humidifier in drier environments.
- Feeding: Fertilize every 4-6 weeks during the growing season (spring and summer) with a balanced liquid fertilizer. Avoid over-fertilizing, as the plant is slow-growing.
- Temperature: Maintain temperatures between 65°F and 80°F. Protect from cold drafts and temperatures below 60°F.
- Soil: Use a well-draining potting mix with organic matter to support healthy growth.
Frequently Asked Questions
-
Why are the white sections of my Monstera turning brown?
Browning can occur due to overwatering, direct sunlight, or low humidity. Adjust care practices to prevent further damage. -
How do I encourage larger leaves and fenestrations?
Provide consistent bright, indirect light, high humidity, and a support structure like a moss pole for climbing. -
Is the Monstera 'Thai Constellation' difficult to care for?
While it requires attention to light, watering, and humidity, it’s manageable with regular care and ideal conditions.
Why Choose the Monstera 'Thai Constellation'?
The Monstera 'Thai Constellation' is a rare and exquisite plant that adds elegance and sophistication to any indoor space. Its stunning variegation, iconic leaf structure, and slow growth make it a prized addition to any plant collection. Perfect for collectors and plant lovers alike, this celestial beauty is worth the care and attention.
*Please note the leaves may not have any splits but those will appear as the plant matures.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.0 ★★★★★
Based on 214 reviews
Sort
Product Reviews
★★★★★ 5
Good stuff
Material Type: 157mil Closed Cell Foam, Style: 157 mil 36 SqFt
Good stuff, easy to use, self adhesive backing contours around curves easily and works great.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 29, 2026
★★★★★ 5
Works amazingly, but only if you install it correctly.
Material Type: 157mil Closed Cell Foam, Style: 157 mil 36 SqFt
If you purchasing Siless Liner 157 mil (4 mm) Sound Deadening mat, to block unwanted sounds in your car, this is what you need to buy. But wait! It's not the only thing you need to buy if you want to "actually" deaden sound.
By itself, it will definitely block a noticeable amount of sound, and, most likely, that's all you realistically need. But... But... If you want the Siless Liner Sound Deadening Mat to really help you take it up a few notches, to get the best sound almost bordering on soundproofing, listen up.
You will have to install traditional butyl rubber first. Doesn't have to be the Siless brand, but I'm sure they would love to sell both to you, I used both Killmat (80mil) and Noico (50mil).
I have a Honda S2000. It's a two-seater convertible sports car if you don't know what this car is, and it's loud when I'm driving above 60mph. I also happen to have a sound system installed as well. Other than that, the car is stock. I first installed the butyl rubber on the car's interior sheet metal. I went all out and covered everything I could. I didn't need to but I wanted to. I was extremely impressed with the results. But I wanted to go further. Not because I needed to but because just wanted to see what it would be like.
So I bought Siless Liner 157 mil (4 mm) 36sqft Sound Deadening mat to go on top of the butyl rubber mats. I put this over every area I installed the butyl rubber. I had to be careful of clearance issues since I added a significant amount of underlayment, and you should too.
If you put butyl rubber sound-deadening materials in 50% of the total interior area, you'll hear a noticeable improvement. If you put butyl in about 80% of the total area, you'll be even more amazed at the improvement, compared to before.
I originally did all the above myself, so that's my experience and so your mileage may vary.
I then installed the Siless Liner Sound Deadening mat over every place I could even going further than I could with the butyl rubber. I used the Siles Liner in areas where butyl rubber would not have been effective, such as the roll bar hoop area and large empty cavities or holes.
I covered everything I could, firewall, doors, floor pan, transmission tunnel, trunk, trunk lid, fuel tank area, rear quarter panels, and rear-wheel tunnels, in Siless Liner Sound Deadening Mat.
WOW!! The Siless Liner Sound Deadening Mat was the icing on the cake! Let's not forget, this car is a convertible sports car so it will never be a quiet ride, ever. But I can now actually have a conversation with a passenger at a normal-ish volume! This also means I can now have a normal hands-free phone call without having to plug one ear to block out the noise! My sound system sounds so much better! Just by going through the install process, I looked for any vibration, rattle, squeak, and noise-prone areas to either eliminate or reduce unwanted noise production. If you forget this step, the inside and outside of your car will rattle and buzz. I skipped this step the first time around. But did it right before I installed more butyl rubber and the improvement was impressive, especially inside the car. Outside the car, I didn't notice a difference until I put the last layer of Siless Liner Sound Deadening Mat. The sound deadening mat works both ways from what I can tell. If I turned up my music, as loud as I occasionally do, parked in the attached garage to the house, with the garage door closed, I would be barely able to tell the car was playing music in the garage. It sounds like it is another car, just a little bit down the street, with a very loud base. If you stand 20 feet away outside the car, the sound system is noticeable, but not obnoxious by a long shot.
Get a 3 piece wood/metal roller set as well, which makes quick work of large areas.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 23, 2021
★★★★★ 5
Better than Kilmat
Material Type: 157mil Closed Cell Foam, Style: 157 mil 36 SqFt
Great adhesion, and you can immediately see the sound difference when you rap the area and compared it to another area without it. Also, very easy to cut and apply. Once on, you may not be able to peel it and reposition it, so be sure where you want it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 2, 2026
★★★★★ 3
Not much noise reduction…
Material Type: 157mil Closed Cell Foam, Style: 157 mil 36 SqFt
Easy to install but did not provide much sound dampening…
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 28, 2026
★★★★★ 5
High quality, super sticky, very effective
Style: 30 sqft
As long as the surface is thoroughly cleaned, these mats will stick to just about anything. They provide my car with a tremendous amount of sound dampening and have made riding in the car 10 times more enjoyable.
I drive a Toyota Yaris and although the engine is built like it's meant to last forever (imagine that), the rest of the car is not of high quality. Which means we used to get A LOT of noise coming from the road, other cars, etc. After I installed these mats which, by the way, I wasn't able to install on every surface I wanted to install them on (due to lack of tools to be able to disassemble certain parts of the interior), the noise coming from outside the car is nearly completely gone.
I covered the underside of my hood, the entire interior part of the hatchback, most of the floor in the trunk / spare tire well, and the entire interior side of the doors. The parts I couldn't get to (or didn't want to) were: the ceiling, underneath the driver & passenger seats, behind the dash and the floor for the 2nd row seating. As you can see I left a lot of surfaces untreated with this product AND STILL it blocks most of the sound.
To note: people recommended getting the roller tools to help install these mats. I got a few of them in different sizes and they worked O K. Not because of the quality of the tool but because some places you need to install these mats in don't have enough clearance to use the tool. That being said, for the larger surfaces, the roller tools help a lot. Also I found it very beneficial to use aluminum tape while installing these. The tape I used is specifically designed for materials that undergo high temperature changes (like your dryer vents, etc.). This wasn't because the mats were not sticky enough but because there were some places I installed the mats with small gaps between them.
I'd also recommend getting some kind of fluffy insulation-type material for large spaces that need noise dampening. Rock wool, for example, worked great for me. As an example, the interior sides of the 2nd row seating walls had large spaces between the plastic interior cover and the metal part of the car wall. I'd install the mats on the metal but was left with 6" - 7" of space between it and the plastic cover. I chose to fill those spots (and spots like it) with insulation which provided EVEN MORE noise dampening.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 25, 2024
recommand products
Epic Gardening Reusable Seed Starter Tray, 6 Cell/ 6 Seedling Starter Trays, Easy Watering, Indoor Greenhouse, UV-Treated & BPA-Free, Terracotta, 6-pk
22.07
Self-watering seed pot | Non-toxic Terracotta seed tray
29.77
Desert West Seed Bundle
27.37
Durable Deep 40-Cell Seed Tray for Healthy Root Development
28.20
Jiffy 11 in x 22 in Plant Tray
26.39