SKU: 23991893482
rattle snake master plant

rattle snake master plant Eryngium yuccifolium

$22.20 $24.67
Save 10%
No.2 Bestseller on banglarkotha24.com >

Pay in installments of $6.17 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 31 - Aug 5

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

rattle snake master plant Eryngium yuccifoliumRattlesnake Master is a warm season perennial native wildflower that grows well on wet or dry to mesic prairie soil. Plants grow 2 to 6 feet tall from a short, thick rootstock. The bluish green basal leaves are up to 2 feet long and 1 1 2 inches wide. The leaf bases clasp the single, erect stem. Flower heads are on stout peduncles at the tip of the stem. Each nearly spherical flower head is from 1 2 inch to 1 inch in diameter and is made up of small

Rattlesnake Master is a warm season perennial native wildflower that grows well on wet or dry to mesic prairie soil. Plants grow 2 to 6 feet tall from a short, thick rootstock. The bluish green basal leaves are up to 2 feet long and 1 1/2 inches wide. The leaf bases clasp the single, erect stem. Flower heads are on stout peduncles at the tip of the stem. Each nearly spherical flower head is from 1/2 inch to 1 inch in diameter and is made up of small flowers.

Whitish bracts stick out sharply from the flowers, which give the flower head a rough, prickly feel and appearance. The heads have a honey like scent and are in bloom June to September. Individual fruits, which mature in the flower head, are less than 1/10th of an inch long.

Eryngium is Greek for "prickly plant" and yuccifolium is Greek for "yucca leaves". Look for this native wildflower in our Butterfly / Hummingbird Native Seed Mix, Midwest Wildflower Native Seed Mix and our Native Tall Grass and Wildflower Seed Mix. 

How To Plant Rattlesnake Master Seeds: 
Direct sow seeds into prepared soil in late fall once soil temps are below 50 degrees (usually mid to late November). Can also be planted in winter during natural freeze/thaw cycles and early spring. Plant shallow, no deeper than 1/8 to 1/4 inch deep and lightly rake to work seed in. Plant in full sun. Can take up to 3 growing seasons to fully establish. 


Seed Info 

Seed Envelopes contain approximately 0.02 ounces of seed and cover about 5 to 10 square feet. 

Product Details 

Flower Color: White

Height: 3 to 5 Feet 

Light Requirements: Full Sun 

Soil Hydrology: Mesic to Wet Soils

Bloom Time: June to September

Plant Type: Perennial 

Stratification: Cold Moist (CM) 60 Days

Attracts: Birds, Bees, Butterflies 

Product Code: ERY01F

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 23991893482

Discover Niche Categories That Outsell rattle snake master plant

Top-Converting Item to Boost Your Average Order

4.3 ★★★★★
Based on 13 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
K
Verified Purchase
kpdrumswritessings
Natrona Heights, US
★★★★★ 5
real time and energy saver, as well as $
Size: 16AWG Wiring Harness-2 Leads
If you have a set of LED lights that didn't come with a harness , you can't beat this for the price. By the time you figure in the cost of the parts ( wire, switch, crimps/connectors, not to mention a relay if you are using one) to hardwire a set of lights, let alone the time to assemble, this set up is cheaper by far. harness length is ample, you get a pair of pigtails with connectors for a pair of lights, the relay, switch, fuse block and fuse, and ring terminals for power all assembled for what a switch and some wire would cost. Made everything quick, cheap, and easy.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 17, 2024
M
Verified Purchase
Miguel
Houston, US
★★★★★ 5
Great wiring harness for light installations.
Size: 16AWG Wiring Harness-2 Leads, Size: 16AWG Wiring Harness-2 Leads
This is a great wiring harness for LED lights. These come in one or two leads application. All that means is that they come ready for one or two lights, depending on your installation. The plug in connectors for each light comes with the set so that is a plus. I’ve attached a picture of the plug/connector for the lights so you can take a look at them. Although the relay is an “overkill” for low wattage LEDs, it’s OK to have it just in case you decide to change your lights for larger ones or halogens, in the future. In my case I will be using this harness in my motorcycle. It is very long for my need, which is great for cars, but too long for motorcycles since you have to remember that room/space is scarce in motorcycles. I ended up cutting the wires to my desired length and using heat shrink butt connectors and “glued” heat shrink covers for waterproofing the connection points. All in all these are great quality and I am very happy with them.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 16, 2020
M
Verified Purchase
Marina De Leon
Louisville, US
★★★★★ 5
Nice
Size: 16AWG Wiring Harness-2 Leads
Worked great, easy to install
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 8, 2026
D
Verified Purchase
Dan from Georgia
Chelsea, US
★★★★★ 4
Wire length between the two connectors is short for a full-size pickup
Size: 16AWG Wiring Harness-2 Leads
I used the harness to wire ditch lights on opposite sides of a full-size pickup (F150). The wire between the 2 2-pin connectors was about 18 inches too short. Fortunately, splicing the wires from the (Nilight) ditch lights and the included pigtails gave barely enough length to reach the connectors. The connectors are buried inside the trim channel for the cowl; I'd have preferred they were exposed on each side to allow for easy swapping of the lights, but I can live with it. There is more than enough wire from the first connector to the relay for my all-under-hood installation, but I didn't think to measure if it would reach into the truck bed. The harness is of good quality and is a very good value. It would be a 5-star if it weren't for that little length issue.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 1, 2025
N
Verified Purchase
Nate Higgers
Lowell, US
★★★★★ 5
great value
Size: 16AWG Wiring Harness-2 Leads
very affordable light install kit. worth the price just in the wiring connectors. I used this with my Nilight front bumper kit. i bypassed the button and wired high beam (+) to the yellow small wire. I did this so when the highbeams come on the light bar comes on. because with the stock arragement of this harness, the button continously draws power for the indicator LED
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 30, 2026

recommand products

New Balance Unisex Furon Dynamite Replica Gk Gloves Black/Black / 6
28.67
Best Seller Assortment- Gardening Gloves – Hearth and Home Mercantile
20.21
Nitrile Weeder Gloves Large / Garden of Paradise
27.88
Ladies Neoprene Garden Gloves
25.23
ProYard 20W 48" LED T5 Grow Light 6400K
29.58