Pay in installments of $5.75 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 3 - Jul 8
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
cybex eternis s safety rating Cybex Gold Eternis S Sensor Safe All-In-One Car SeatThe CYBEX Eternis S with SensorSafe is the only seat your child will need from birth and beyond. With three modes rear facing, forward facing, and booster, this All In One Convertible Car Seat is designed for use from birth up to 120 lbs. The Eternis S with SensorSafe features Linear Side impact Protection, and a patented 3 position reclining headrest that guides the childs head and neck into a proper position while they are asleep. With SensorSafe
The CYBEX Eternis S with SensorSafe™ is the only seat your child will need from birth and beyond. With three modes - rear-facing, forward-facing, and booster, this All-In-One Convertible Car Seat is designed for use from birth up to 120 lbs. The Eternis S with SensorSafe features Linear Side-impact Protection, and a patented 3-position reclining headrest that guides the child’s head and neck into a proper position while they are asleep. With SensorSafe™ technology, you'll gain instant insight into your child's well-being—right to the SensorSafe app on your phone. Built into the chest clip of CYBEX car seats, SensorSafe provides alerts when unsafe situations arise including if a child unbuckles themselves; if the back seat has become too warm or too cold if a child has been seated for too long, and if the driver accidentally leaves the child behind.
Specifications
- Rear-facing from 4 lbs. to 50 lbs. Forward-facing from 22 lbs. to 65 lbs., Belt-positioning Booster from 40 lbs. to 120 lbs.
- SensorSafe™technology uses a Bluetooth-enabled chest clip to send mobile app alerts when potential unsafe situations arise (not used in Belt-positioning Booster mode).
- Linear Side-impact Protection absorbs up to 25% more impact forces in a collision (when compared to the same car seat without L.S.P. extended).
- Patented 3-position reclining headrest helps prevent the child's head from falling forward while asleep, keeping the head and neck in a proper position.
- In-seat recline provides correct ergonomic positioning and extra legroom, allowing your child to ride rear-facing longer.
- 12-position, height-adjustable headrest with a no-rethread harness.
- 6-position one-hand adjustable recline for the best fit to your car.
- Magnetic buckle holders for easy entry and exit from the seat.
- Removable newborn insert provides support from 4 to 11 lbs.
- Dishwasher-safe cup holder can be positioned on either side.
- Harness pads and 2-position padded buckle.
- Steel reinforced frame provides strength and durability.
- Energy-absorbing shell and base help reduce the forces felt by the child in a collision.
- Dual-level indicators to help ensure the proper angle.
- Innovative one-pull LATCH removal system.
- LATCH Connection storage provided under the seat when not in use.
- Designed and engineered in Germany.
- 2-year warranty.
Dimensions & Weight
- H 25.5” x W 20” x D 25.3”
- 26 lbs.
- Use from birth up to 120 lbs. or 57 inches.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.6 ★★★★★
Based on 1946 reviews
Sort
Product Reviews
★★★★★ 5
Easy to Install and Looks Great
Color: White, Size: 15.7 Inches
These floating shelves are a great addition to my daughter room space! They were very easy to install, and the instructions were clear and straightforward. The material feels solid and durable. I also really appreciated that the package included all the necessary hardware and materials, which made the setup even more convenient.
They look great on the wall and serve their purpose perfectly. Highly recommend!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 9, 2026
★★★★★ 5
Nice decorative shelves
Color: White, Size: 15.7 Inches, Color: White, Size: 15.7 Inches
Love these shelves! Nice, sturdy and decorative!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
★★★★★ 3
Quality Assurance Lacking
Color: White, Size: 15.7 Inches
The first set I ordered was great; super easy to install, no issues. The second set I ordered the holes on the bottom of the shelves did not match up with the holes on the bar that secures the shelves to the wall so it was impossible to attach the shelves correctly. I'm still trying to figure out a solution.
TO SUMMARIZE: First set perfect; second set unusable
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 2, 2026
★★★★★ 5
Worth it if you're a figure/doll collector!
Color: A. Black Board & Black Brackets, Number Of Shelves: 4, Size: 16-inch, Color: A. Black Board & Black Brackets, Number Of Shelves: 4, Size: 16-inch
I ordered these shelves to display my figures and dolls, and I love the way they look! I ordered 2 sets of the 4 pack in black with black hardware. After looking at reviews, I took the jump and bought them and don't regret it!
TL;DR: Listing is accurate, don't use the paper measurement thingy, quality is what you'd expect for the price, doesn't come pre-drilled, easy enough to put together, over all worth it if you're looking for smaller, decent quality, decent price shelves especially if you display figures or dolls.
1. Listing: They are accurate to the measurements! They're only 5.5 inches deep, so there isn't much (if at all) any room for layering. They do feel small, but the listing is accurate!! Mine are paired next to each other to create a "longer" shelf. DO NOT use the paper measurement thingy. Another review mentioned it was un-even, and after holding it to mine, yeah, it was off. I'd highly recommend a stud finder, small leveler, and a white gel pen or marker to mark where to drill if you do.
2. Assembling & Mounting: The shelves didn't come with pre-drilled holes for the mounting options because it was easy enough to screw into. I will warn you that the small screws only came with a singular extra, so be careful about losing them in case it's the same for you... I'd highly recommend doing this on a FLAT surface. I stood the shelves on the side that would be flat against the wall and set the brackets against it. I put one screw in on each side (both brackets have 1 screw to hold them where I want) then I laid it on its top and tightened and added the other screw. I may have done more work than needed, but none of mine are leaning forward or backward super far. I used the "load bearing" mount simply because I like the look but if you intend to put books, I would do the "no drop" design and possibly get some other L brackets for more support since books can get heavy. PLAN WHERE YOU WANT THE BRACKETS if you intend on doing the "load bearing" design or adding any more brackets.
4. Quality: I kind of expected the wood to be a bit thicker/more sturdy feeling, but upon realizing they didn't come pre-drilled, it made more sense. THEY CHIP AND SCRATCH EASILY. If you're like me and don't really care as long as you cant see/don't notice it, then this isn't any concern but they may come damaged cause some of our mail couriers aren't the best. If you stick them in the corner like I did, please be careful about it slipping! I accidentally dropped the second one from a 21-inch TV stand after adding brackets, and the corner chipped (yes, I measured). The hardware is standard screw quality, and the brackets could be better. After reading the broken bracket reviews plus the price, I honestly wasn't expecting much, but they aren't too bad! You can always replace them with another one you like!
5. Overall: I'd say these are worth the price and I see why "customers usually keep this item"! They were easy enough to mount, even if you aren't the handiest man out there. I'd definitely recommend these if you're looking to display anime figures or dolls like I do! They're nice for adding vertical space without sticking out of the wall too much! Definitely good for smaller spaces! I'm very happy with this product and will more than likely return to this listing if I want some decent and affordable shelving!
Thank you for reading my review, Im usually hesitant to buy online so I hope it helps you decide if you wanna buy these shelves as well!
(Also, in case anyone is wondering the layout, the longest shelf will be 1, the middle length will be 2, the shortest length will be 3. It's the last image of the review!)
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 8, 2025
★★★★★ 5
Stylish, Sturdy and Perfect for Small Spaces
Color: A. Black Board & Black Brackets, Number Of Shelves: 4, Size: 16-inch, Color: A. Black Board & Black Brackets, Number Of Shelves: 4, Size: 16-inch
Love these shelves! They are sturdy, easy to install, and perfect for organizing bathroom essentials.
I used them above the toilet, and they fit perfectly in a small space. They helped me keep things organized while also adding a modern and decorative touch.
Great quality and very functional. Highly recommend for anyone looking to upgrade their bathroom without taking up extra space!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 5, 2026