SKU: 70708289366
buy ladybugs for house plants

buy ladybugs for house plants Ladybugs Adults in Retail Paper Cup – L.O.T.U.S. Urban Farm & Garden Supply, Greenville

Sale price$19.05 Regular price$21.17
Save 10%

Pay in installments of $5.29 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 19 - Aug 24

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

buy ladybugs for house plants Ladybugs Adults in Retail Paper Cup – L.O.T.U.S. Urban Farm & Garden Supply, GreenvilleLadybugs Adults in Retail Paper Cup TARGET PESTS Aphids, Mealybugs, Mites, Thrips, & many other soft bodied insects. DESCRIPTION Scientific Name: Hippodamia convergens Also known as the convergent lady beetle, LADYBUGS are among the most recognized garden allies. They exhibit the typical round dome shape of the Coccinellidae family, measure about 5 8mm, and have red to orange colored wing covers adorned with black spots. They are distinguishable from

Ladybugs Adults in Retail Paper Cup

TARGET PESTS
Aphids, Mealybugs, Mites, Thrips, & many other soft-bodied insects.

 

DESCRIPTION
Scientific Name: Hippodamia convergens
Also known as the convergent lady beetle, LADYBUGS are among the most recognized garden allies. They exhibit the typical round dome shape of the Coccinellidae family, measure about 5-8mm, and have red to orange colored wing covers adorned with black spots. They are distinguishable from other lady beetles by the prominent black and white lines that converge behind the head. Both adults and larvae will actively seek and feed on a wide range of small insects, and occasionally nectar and honeydew. Adults can thrive for weeks or months in a variety of temperatures and humidity levels, as long as they have adequate food and water. In some cases, they may even overwinter in cracks and crevices. The full life cycle, from egg to adult, takes approximately 2-3 weeks. Females seek out aphid colonies and lay small clusters of 200 to over 1,000 yellow spindle-shaped eggs on the undersides of leaves. In about 3-5 days, the eggs hatch into dark, alligator-like larvae with three pairs of legs. These larvae actively seek prey for the next 10-30 days, sometimes traveling as far as 40 feet. After full development, the larvae undergo pupation for 3-12 days in a protective pupae attached to a leaf or stem until emerging as fully formed adults.

Our carefully chosen ladybugs go through a special cleaning and feeding process to make sure they are in tip-top condition. We include a food and drink source in each retail package to keep them ready for action.

LADYBUG LIFE-CYCLE:

Egg: 2-5 days  |  Larvae: 21 days  |  Pupa: 7 days  |  Adult: 1 year

 

TEMPERATURE
33-105°F


INTRODUCTION RATES
LIGHT INFESTATION:
Introduce 1 ladybug per square foot, monthly.

MODERATE INFESTATION:
Introduce 1 ladybug per square foot, bi-weekly, 2-3 times.

HEAVY INFESTATION:
Introduce 1 ladybug per square foot, weekly, 2-4 times.

It's important to note that these release rates serve as general guidelines and may vary based on the specific pest species, the crop or plant being treated, and level of infestation. Proper monitoring of the infestation and the subsequent effectiveness of the released beneficial insect population is crucial for determining the success of the biological control strategy.


HOW TO RELEASE:

  1. Introduce ladybugs in the early morning, evening, or on a cloudy day when the temperatures are cooler. 
  2. Mist leaves to improve ladybug habitat. Misting the foliage beforehand may improve performance. With ample food and moisture, ladybugs can begin to reproduce immediately.
  3. Introduce ladybugs at the base of the plants.
  4. Introduce multiple times throughout the growing season to stay ahead of the pest lifecycle.
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 70708289366

Discover Niche Categories That Outsell buy ladybugs for house plants

Top-Converting Item to Boost Your Average Order

4.5 ★★★★★
Based on 15 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
R
Verified Purchase
Ricardo
Louisville, US
★★★★★ 5
Great product
Style: Modifier
Noticed a more smooth engine idle and less tick noise in my Tacoma. Is a win
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 1, 2026
B
Verified Purchase
Brian Kolley
New York, US
★★★★★ 5
My 2018 Mustang GT BBQ Tick went away but came back.
Style: Modifier
Update 1-26-2019: The BBQ/Typewriter tick came back this morning. So, I'd say that if you're trying to use the Ceratec to quiet the tick, it will work for a little while, but will eventually return. I don't think there's anything else that can be done to quiet the tick and it's a crap shoot if you get it serviced. In my case, it only ticks during warm up after the transition from high idle, and goes away completely once the entire engine is fully warmed up, so I'm just going to live with it. I'm still giving the Ceratec a 5 because it did reduce my friction enough for a small MPG improvement, so I believe it works as advertised and I'm not going to blame them for not silencing the tick. Update 1-20-2019: After a few days with only the one bottle poured in, my tick came back. Since one bottle is only 1/2 the recommended concentration for the 10 quarts in a 2018 Mustang GT, I bought another bottle and added it and the tick is now gone again. We'll see if it lasts. I can tell you that my fuel economy has improved. I have a little over 11,000 miles now and I always display my fuel economy meter and I use it. I've never reset my average fuel economy meter since the day I bought the car new. I've been pretty well stuck at 21.6 MPG for the last couple months. Since I've put in the Ceratec, my average fuel economy has increased to 21.8 MPG, so it's jumped 0.2 MPG in roughly 2 weeks. With over 11,000 miles included in the average, it takes a pretty significant improvement in friction to make that average move that much in that short a time. Even if my tick comes back again, I'm sold on Ceratec for the friction reduction alone. I'll update the review again if the tick comes back. Original Review: My 2018 Mustang GT developed the infamous BBQ/Typewriter tick immedaitely after my first oil change. I used Mobil One synthetic at 3500 miles on my first oil change. I did my 2nd oil change at 10K miles with Mobile One, but the tick was still present. After seeing people on YouTube having success eliminating their tick with Ceratec and after reading the one other review of a 2018 Mustang GT owner here on Amazon, I decided to try it. I ordered 1 bottle. It arrived on a Friday and poured it in immediately after I got home from work. It's an hour drive one way to work, so the engine was at operating temperature, where, in my case, the tick goes away. I only get it when the engine switches from high idle to normal idle after a cold start and the tick is quite loud for at least the 15 minutes it takes for me to get to the drive through where I get my morning coffee, where I can really hear the tick echoing off the wall. After pouring it in, I started the car and let it idle, but didn't really notice any change. I then took it for a drive and did some hard pulls to get the engine to rev under load to the red line. After that, I put the car in the garage until I drove to work on Monday. When I went to the drive through to get my morning coffee, there was no tick! It was gone! I listened real hard, but all I could hear was the normal direct injector pump noise. Then, after my hour long drive to work, I left car running and got out to listen. With the hood closed, it was quieter than at any time since I bought it. It was virtually silent. Even the DI pump noise was barely audible. The car also sounded and felt different during the drive to work. The engine seemed like it was smoother somehow. It might have been my imagination, but after the silence in my parking spot at work, I wouldn't be surprised if the engine did run smoother. At any rate, I only used 1 bottle to treat the 10 quarts of oil, which is half the amount the mfg says to use. So, I'll see how long it lasts, but it definitely worked even at half its normal concentration. I highly recommend it for anyone who has the 2018 Mustang GT tick.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 14, 2019
M
Verified Purchase
Mike L
Fort Morgan, US
★★★★★ 5
Must have in modern high compression GDI engines!
Style: Modifier
So bought this for my new Mazda 3 Turbos' first oil change. I was originally going to use Liqui Moly MoS2, due to the OE Mazda oil using a very high Moly PPM (800ish) formula and not having easy access to a similarly formulated oil. After doing some more reading i decided to use Ceratec instead, mostly because it doesn't make the oil look super dark (for warranty purposes, If for some reason i do have a problem with the engin i don't want the dealer saying I just didn't change my oil). So initial results are awesome, the valve noise is pretty much gone. And the engin just feels smoother, and sounds like is not even trying when reving it out. With that success I bought another one for my girlfriends non turbo CX30 when i changed her oil. Her engine has always been just a little noisier than my old non turbo mazda 3, and my new Turbo model. I've used the same oil in both (Pennzoil Ultra Platinum 0w20 or 5w30 in the turbo). It had the normal lifter noise, but it always sounded raspy when accelerating hard, like it was really at the edge when floored. So as a before and after test I changed the oil fist with NO Ceratec, engin sounded happier, ran a little smoother, but basically the same as before, Normal stuff after an oil change. So I added the Ceratec, literally you could hear the lifter noise melt away as it mixed with the oil, I was in my garage so the effect was even more stark. The engine also idled smoother, to the point if you were in the car, you wouldn't know it was on without the engine RPM readout. So i took it for a test drive down the road and stepped on it after getting it up to Temp. The raspiness was completely gone, it sounded like it was happy as a clam reving right up to redline. This wasn't a "i think it might be better" differance, it was a night and day difference, a wow that impressive difference. As for fuel consumption reduction claims, i don't know yet, from what i read you need to dive it 300-400 miles to get a valid result. I only have 150ish on mine and 75 on hers. First impressions were really positive, highly recommend to anyone wanting to keep a car for a really long time. Only downside is the price, this stuff is really expensive... but i look at it like this, $600 over the life if the vehicle if you keep it to 150K miles, with 6k oil change intervals is pretty cheap insurance. compared to an engine rebuild.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 21, 2021
W
Verified Purchase
William L Rose Jr.
Carnegie, US
★★★★★ 4
Results after 1500 miles....
Style: Modifier
Seems to have made my engine a little less noisy at startup.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 3, 2026
A
Verified Purchase
A. Mitchell
Lowell, US
★★★★★ 5
Been Using For a good While
Style: Modifier
Always quality product
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026

recommand products