Pay in installments of $6.21 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 3 - Jul 8
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
cybex dip chin leg raise Cybex Free Standing Dip / Chin Assist Commercial Gym Equipment – BNB SupplementsUsed equipment. Fully Functional. Standard Signs of Use. The Cybex Chin Dip Assist has an easy to adjust weight stack that allows for quick adjustment of desired assistance. It offers a maximum of 112 lbs. (51 kg) and a minimum of 16 lbs. (7. 3 kg) of assistance for users of all fitness levels. The steps allow easy ingress and egress, allowing users of all heights a full range of motion. The foot bar easily flips up for unassisted pull ups and dips.
Used equipment. Fully Functional. Standard Signs of Use.
The Cybex Chin Dip Assist has an easy-to-adjust weight stack that allows for quick adjustment of desired assistance. It offers a maximum of 112 lbs. (51 kg) and a minimum of 16 lbs. (7.3 kg) of assistance for users of all fitness levels. The steps allow easy ingress and egress, allowing users of all heights a full range of motion. The foot bar easily flips up for unassisted pull-ups and dips. The dip handles swivel in two positions to accommodate users of varying sizes and goals, and the pull-up bar offers both bar and neutral grips for individual preference. The standing design allows for greater body alignment and range of motion.
TECH SPECS
- Dimensions: 59"L x 49"W x 98"H
- Weight: 660 lbs (300 kg)
For a Shipping quote, please message with:
1. Address
2. Commercial or Residential Location
3. Will you need a lift gate or is there a loading dock, forklift, tractor, etc.?
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.8 ★★★★★
Based on 942 reviews
Sort
Product Reviews
★★★★★ 4
good item
Size: PP67-712 V1
arrived on time , haven't installed as of yet, will add comments once installed but looks like it is what I need and was as described .
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 21, 2019
★★★★★ 5
Direct replacement on my 95 SeaRay 175
Size: PP67-712 V1
My boat started to have issues with not turning over when I used the ignition switch. Replaced the switch and had no effect. Replaced the solenoid and that fixed the problem. Good price, so I replaced all 3 solenoids (Trim/ starter). Solenoids had all needed hardware (nuts/washers)
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 9, 2024
★★★★★ 5
They Fixed My Boat
Size: PP67-712 V1
My boat wouldn’t start, and the outdrive wouldn’t go up or down. So I bought three of these solenoids and replaced the starter and both trim motor solenoids/relays. Now it starts right up with no problems and the trim motor is working again also. I have a 2006 Stingray boat.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 7, 2022
★★★★★ 1
Poor quality
Size: PP67-712 V1
Poor quality. Replaced a starter solenoid on a mercruser 4.3. Right off install it would click but not make a connection to start motor. Confirmed this was the culprit by jumping the terminals. After testing multiple times found it worked a little less than half the time.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
★★★★★ 5
Ya Just Gotta Have One
Size: 7.2 Surround + 3 HDMI
This is a must-have for in-wall wiring of your surround. I chose this one because I installed a 7.2 system with gold-plated jacks and it worked out great. You can get almost any combination of HDMI, subs/surrounds that you need (5.1, 5.2, 7.1, 7.2 etc). Do your planning on location and wire-routing; get good quality speaker wire and HDMI (high-speed with Audio Return Channel); get the remod-style mounting bracket/box then cut your hole at the same height/level as your electrical outlets and preferably between the same studs as your TV's wire-box so your HDMIs just run straight up to the TV (remember to install the bracket BEFORE you run your wires). When connecting the wires to these terminals, it's best to have 10 to 12 inches of wire coming out of the wall because you need space for your hands to manipulate the wires and nuts on the terminals. If you have a basement with access to the floor below the mounting location, it's best to drill 4 half-inch holes straight up through the bottom plate of the wall and feed your wires up those holes. Tip: If your TV and Surround Receiver are fully compatible you really only need 1 HDMI port on the wall plate, because you can plug your devices into the receiver and just sent the A/V/data to the TV while the audio is returned over the same HDMI.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 2, 2016