SKU: 29962526766
vintage embroidered dress

vintage embroidered dress 1960s Dusty Peach Pink Embroidered Ruched Gown | Vintage Bridesmaid or Prom Dress

Sale price$20.39 Regular price$22.66
Save 10%

Pay in installments of $5.67 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 21 - Aug 26

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

vintage embroidered dress 1960s Dusty Peach Pink Embroidered Ruched Gown | Vintage Bridesmaid or Prom DressThis 1960s embroidered dress is impossibly small and equally as adorable. With a ruched bodice and gathered skirt covered with embroidered flowers and olive green velvet ribbon at the waist. The color combination is so pretty. *Amazing embroidery on the skirt. *Ruched Bodice. *Velvet Ribbon wraps around and snaps closed. The embroidery on the skirt is varied in color from pink to peach, see below condition write up and zoom around the images to get a

This 1960s embroidered dress is impossibly small and equally as adorable. With a ruched bodice and gathered skirt covered with embroidered flowers and olive green velvet ribbon at the waist. The color combination is so pretty.

*Amazing embroidery on the skirt.
*Ruched Bodice.
*Velvet Ribbon wraps around and snaps closed.

The embroidery on the skirt is varied in color from pink to peach, see below condition write-up and zoom around the images to get a closer look.

The dress is fully lined. It has an outer synthetic chiffon layer that is embroidered. There is a stiff net under slip that gives the skirt a little bit of structure. It zips up the back with a nylon zipper.

This listing is for the dress only and does not include the vintage necklace.

Condition: Very Good. Zoom around the images and look closely at the embroidery. You will notice some of the flowers and petals are more peach in color and some are more pink. I'm not sure if this is due to discoloration or a variation in the thread color. A tiny bit of yellowing under the arms. Some soiling around the bottom of the skirt. The bodice looks dusty from storage.

I love this one and hope she finds someone small enough who can wear and enjoy her!

Measurements:
XXS
Bust 33" (when working the tape around the bust)
Ribs 26"
Waist 22"- 23" (So very small in the waist)
Hips 42"
Length 55 1/2"

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 29962526766

Discover Niche Categories That Outsell vintage embroidered dress

Top-Converting Item to Boost Your Average Order

4.7 ★★★★★
Based on 8 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
K
Verified Purchase
kpdrumswritessings
Bozeman, US
★★★★★ 5
real time and energy saver, as well as $
Size: 16AWG Wiring Harness-2 Leads
If you have a set of LED lights that didn't come with a harness , you can't beat this for the price. By the time you figure in the cost of the parts ( wire, switch, crimps/connectors, not to mention a relay if you are using one) to hardwire a set of lights, let alone the time to assemble, this set up is cheaper by far. harness length is ample, you get a pair of pigtails with connectors for a pair of lights, the relay, switch, fuse block and fuse, and ring terminals for power all assembled for what a switch and some wire would cost. Made everything quick, cheap, and easy.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 17, 2024
M
Verified Purchase
Miguel
Omaha, US
★★★★★ 5
Great wiring harness for light installations.
Size: 16AWG Wiring Harness-2 Leads, Size: 16AWG Wiring Harness-2 Leads
This is a great wiring harness for LED lights. These come in one or two leads application. All that means is that they come ready for one or two lights, depending on your installation. The plug in connectors for each light comes with the set so that is a plus. I’ve attached a picture of the plug/connector for the lights so you can take a look at them. Although the relay is an “overkill” for low wattage LEDs, it’s OK to have it just in case you decide to change your lights for larger ones or halogens, in the future. In my case I will be using this harness in my motorcycle. It is very long for my need, which is great for cars, but too long for motorcycles since you have to remember that room/space is scarce in motorcycles. I ended up cutting the wires to my desired length and using heat shrink butt connectors and “glued” heat shrink covers for waterproofing the connection points. All in all these are great quality and I am very happy with them.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 16, 2020
M
Verified Purchase
Marina De Leon
Dallas, US
★★★★★ 5
Nice
Size: 16AWG Wiring Harness-2 Leads
Worked great, easy to install
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 8, 2026
D
Verified Purchase
Dan from Georgia
Natrona Heights, US
★★★★★ 4
Wire length between the two connectors is short for a full-size pickup
Size: 16AWG Wiring Harness-2 Leads
I used the harness to wire ditch lights on opposite sides of a full-size pickup (F150). The wire between the 2 2-pin connectors was about 18 inches too short. Fortunately, splicing the wires from the (Nilight) ditch lights and the included pigtails gave barely enough length to reach the connectors. The connectors are buried inside the trim channel for the cowl; I'd have preferred they were exposed on each side to allow for easy swapping of the lights, but I can live with it. There is more than enough wire from the first connector to the relay for my all-under-hood installation, but I didn't think to measure if it would reach into the truck bed. The harness is of good quality and is a very good value. It would be a 5-star if it weren't for that little length issue.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 1, 2025
N
Verified Purchase
Nate Higgers
Dallas, US
★★★★★ 5
great value
Size: 16AWG Wiring Harness-2 Leads
very affordable light install kit. worth the price just in the wiring connectors. I used this with my Nilight front bumper kit. i bypassed the button and wired high beam (+) to the yellow small wire. I did this so when the highbeams come on the light bar comes on. because with the stock arragement of this harness, the button continously draws power for the indicator LED
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 30, 2026

recommand products