SKU: 43867239313
mountain bike schutzblech

mountain bike schutzblech EPA MTB Vorder- & Hinterrad Schutzblech Set (Carbonfaser) KURZE VERSION kaufen

$26.19 $29.10
Save 10%
No.2 Bestseller on banglarkotha24.com >

Pay in installments of $7.28 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 27 - Aug 1

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

mountain bike schutzblech EPA MTB Vorder- & Hinterrad Schutzblech Set (Carbonfaser) KURZE VERSION kaufenCarbonfaser MTB Schutzbleche bieten maximalen Schutz fr Fahrer und Bike. Die EPA Carbonfaser MTB Schutzbleche sind handgefertigt fr eine perfekte Passform und ein stylisches Aussehen. Du siehst hier eine brandneue Erfindung von EPA, ein bahnbrechendes Mountainbike Vorder Schutzblech, das speziell fr Fox und Boxxer Gabeln entwickelt wurde und aus hochglnzendem, echtem Carbonfaser gefertigt ist. Die EPA Carbonfaser Schutzbleche bieten maximalen Schutz

Carbonfaser-MTB-Schutzbleche bieten maximalen Schutz für Fahrer und Bike. Die EPA Carbonfaser-MTB-Schutzbleche sind handgefertigt für eine perfekte Passform und ein stylisches Aussehen.

Du siehst hier eine brandneue Erfindung von EPA, ein bahnbrechendes Mountainbike-Vorder-Schutzblech, das speziell für Fox- und Boxxer-Gabeln entwickelt wurde und aus hochglänzendem, echtem Carbonfaser gefertigt ist.

Die EPA Carbonfaser-Schutzbleche bieten maximalen Schutz für den Fahrer, sie sind so konzipiert, dass sie alle Spritzmomente im Gesicht verhindern, die deine Fahrt, dein Bike und deine Kleidung bei typischen nassen Mountainbike-Touren ruinieren könnten. TDas vordere Carbonfaser-Schutzblech (325 mm) reduziert zudem deutlich die Ansammlung von Schlamm und Staub an den Gabelholmrohren, was die Lebensdauer deiner Gabel verlängert und ihre optimale Leistung während der Fahrt erhält. Das kurze hintere Schutzblech schützt dein hinteres Dämpfungsgelenk und verhindert Spritzwasser auf deinem Rücken.

Die vorderen und hinteren Carbonfaser-Schutzbleche werden mit Kabelbindern (im Lieferumfang enthalten) befestigt, die sie sicher an der Gabelbrücke und am Gabelbein fixieren, wodurch das Schutzblech beim Fahren sehr stabil und geräuschlos ist und das flache, elegante Design besonders cool wirkt.

Das hintere Carbonfaser-Schutzblech wird unvorbohrt geliefert, im Gegensatz zu Schutzblechen mit vielen Befestigungslöchern, damit es nach Bedarf montiert werden kann und dabei sein Aussehen behält. Zum sauberen Einbau ist ein 5 mm Brad Point-/Lip- und Spur-Bohrer erforderlich.

Der Schlammabstand ist gut, der Abstand zwischen deinem Reifen und der Gabelbrücke ist der minimale Abstand, da das Schutzblech einen etwas größeren Durchmesser als die Räder hat, wird der Abstand maximiert, während das flache Design erhalten bleibt. Gleiches gilt für das hintere Schutzblech.

Sie können mit allen Radgrößen verwendet werden, 26", 650B und 29" für XC-, Trail-, Enduro- und DH-Bikes.

Diese Schutzbleche sind aus Carbonfaser gefertigt und wiegen nur 100 Gramm, sodass sie dein Fahrwerks-Setup nicht beeinträchtigen.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 43867239313

Discover Niche Categories That Outsell mountain bike schutzblech

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 12 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
A
Verified Purchase
afireinside1988
Battle Creek, US
★★★★★ 5
Excellent fit and finish for the money. Just buy them.
Size: For BMW E46 2002-2005, Size: For BMW E46 2002-2005
Perfect fit. These grilles were better quality than the price would suggest. Easy to install, not brittle, and fit very snug. I’m not sure why there are so many negative reviews for these. I was fairly rough with the first one I installed and it didn’t crack. They look great. For a purist with excess money lying around, sure, go with genuine BMW. For a daily driver, you’d never know the difference aside from the black finish. Save the money spent on these over the OEM BMW and use it for something else. Below need not be read unless you like long winded car resurrection stories... The back story on the car for those who might wanna talk trash about its condition: I bought this ‘01 330xi from a buddy who really beat the car up. I’ve had to replace the entire front end and am in the process of painting the car. I had to source a hood at my local pick ‘n pull due to low funds because I bought a new house recently. The hood I found at the parts yard was for an ‘04 e46 (post facelift). Hood fits just fine and the grilles are perfect. Don’t hesitate to buy!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 10, 2020
D
Verified Purchase
Daniel Bremer
Alexandria, US
★★★★★ 5
e46 Sedan Black Kidney Grill: Good fit with a better attachment mechanism than stock!
Size: For BMW E46 1998-2001
These kidney grill replacements were for a e46 sedan (323i). They fit really well. They come with a different type of attachment mechanism than other types I've used in the past: These have 'posts' with a slight groove that you gently pry into place against the hood's mounting tabs. It's a solid holding mechanism - much better than the tab-types I've seen in the past. These do not wiggle around, and feel very solid once mounted. They DID require a bit of fitting with a dremel where the hood release latch is mounted to the hood. I had to cut back about half-an-inch of the inner 'shell' of the grill so it didn't interfere with the latch when you pull 'up' on it to release the hood. Based on having an e46 sedan for 16+ years, and having replaced the kidney grills several times, I'm quite fine with a little bit of modification for a good fit. I like these quite a bit better than other aftermarket types, and even the OEM BMW grills. The price is good, and mounting is solid. I liked them so much, I purchased a second set for my son's 323i right after putting them on one of my 323i's. I plan on getting a set for a 325Ci one that car needs replacements.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 24, 2021
J
Verified Purchase
Jean Colon
Birmingham, US
★★★★★ 5
They fit super snug and the quality is way better than price suggests.
Size: For BMW E46 2002-2005
They came in wrapped very well in foam and bubble wrap. They felt sturdy and the matte finish was satisfactory. They needed quite some pressure to snap in but when they did you could tell they weren’t going anywhere. The fitment is perfect and it looks great. If the stubs in the car where the grille clips attach are in tact you shouldn’t have a problem. Don’t be discouraged by the negative reviews.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 30, 2024
W
Verified Purchase
W. Biggs
Draper, US
★★★★★ 4
Good value for the money
Size: For BMW E46 2002-2005
The matte is flawless and looks pristine & super easy to install. It does fit and it’s a good enough fit for a daily driver; however, it’s not a flawless fit. It’s off by maybe a 1/16th on the inside corners. It’s amazingly close despite the price point…would definitely recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 28, 2022
S
Verified Purchase
Slow Walk
Port Orchard, US
★★★★★ 1
VERY poor materials and fit for E46, WILL FALL OUT
Size: For BMW E46 2002-2005, Size: For BMW E46 2002-2005
This part resembles the original, but not enough. It is both too big AND too small, depending on the dimensions. It's too small from top to bottom, and too big from side to side. The locking tabs don't get close enough to lock (see pics) because there is too little clearance. Viewing from the front, the outer top corner is so far out (see pics) that the most important tab cannot properly lock in, causing the grill to drop out into my hand (or the ground, if I wasn't there to catch it). The grill also is missing some important curves to follow the shape it is supposed to fit into. It also wasn't matte black as ordered. It looks like it was spray-painted, but I can't be sure. it is made of VERY brittle plastic, and the locking tabs are VERY small and flimsy. I wouldn't expect this part to survive a month or two before blowing away in a medium breeze. One positive is that there is a relief cut to allow the hood safety catch handle to move fully upward without interfering with the plastic grille. That one positive has a lot of making up to do, and there's no way it can do it. Add to that that the seller included instructions for a car fifteen years newer than the model advertised on the item page, and we have a complete failure. But don't worry! I'm sure the seller will probably delete the listing and make a new one so they don't have to have this honest review attached to it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 6, 2025

recommand products

Boss OC-2 Octave – Chicago Music Exchange
24.38
Boss OC-5 Octave Pedal
27.50
Tone King Imperial Preamp Tri-Tube Preamp Pedal – Chicago Music Exchange
28.67
Crankbrothers Stamp 1 Gen 2 Pedals
21.57
Original Boss OC-2 Octave Pedal Vintage Box Only
24.43